Chest Freezer Racks,
Cat. No. 6096, 5978,
6231 and 5972

Upright Freezer Racks,
Cat. No. 6112-1, left
Cat.No. 6113-1, right

	Ultra-Low Temperature and Cryogenic Storage Freezers

Inventory Systems
Inventory Racks, Dividers and Boxes

Revco Freezer Inventory System Directory
Introduction To Inventory Systems
Inventory System Cross Reference Chart
Chest Freezers
Upright Freezers
Drawer Racks
Fiberboard Boxes
Grid Dividers
Plasma Box Rack
Red Cell Canister
Upright Freezer Shelves
Wire Basket Kits
FreezerWorks™ Inventory Management Software

Cost Effective, Easy To Use

	SBS Standard Microplate Rack, Cat. No. 6734

The Revco inventory system is designed for flexibility, easy storage and retrieval, and accurate inventory management. Revco standard racks, boxes, dividers, and baskets can enhance the value of your freezer by saving space and improving inventory management. The inventory system selection chart lists the most com-mon racks arrayed according to cabinet configuration and size.

A basic configuration includes stainless steel inventory racks, fiberboard boxes 5.25" square (13.3 cm), either 2" or 3" high (5.1 or 7.6 cm), and box cell dividers in grid patterns from 49 to 100 cells
Catalog numbers for individual racks are different than complete package inventory kits
Racks, boxes and dividers can be ordered separately
Complete inventory kits are conveniently packaged under a single catalog number to include the maximum quantity of stainless steel racks, plus your choice of 2" or 3" (5.1 cm or 7.6 cm) fiberboard boxes with 100-cell dividers

Inventory System Cross Reference Chart
Cabinet Rack Dimensions, Catalog Numbers for
Individual Racks and Full Load Systems

Drawer Rack
For upright freezers only. Stainless steel drawer racks hold standard 2"or 3" (5.1 cm or 7.6 cm) boxes (ordered separately). Drawers slide out for easy access to boxes. See chart for selection and catalog number.

Fiberboard boxes with dividers

Fiberboard Grid Dividers

Plasma Box Rack,
Catalog No. 6097

Plasma Box Rack,
Catalog No. 6111-1

Red Cell Cannister,
Catalog No. 6225

Plasma Box Rack

Red Cell Canister
For flat freezing and storage; holds one standard 1,000 ml red cell bag, plus tubing sections in external slot.

Upright Freezer Shelves
Solid stainless steel shelves are reinforced for heavy loads. Shelves rest on removable mounting brackets which are adjustable in 1" (2.54 cm) vertical increments. Each shelf includes 5 clips for left, rear and center support.

Note: All shelves are adjustable except standard top shelf, fixed position

Wire Basket Kits
Wire baskets offer convenient inventory management for chest freezers. The three-level array has upper and middle level baskets which slide on mounting rails. Bottom baskets rest on the freezer interior bottom which is protected by a high impact polystyrene liner.

Catalog numbers in chart refer to complete basket kits including baskets, rails, liner and mounting hardware
Large baskets are 16.5"Lx10.4"Wx7.8"D (41.2cm x 26.1cm x 19.8cm)
Small baskets are 16.5"Lx8.5"Wx4.5"D (41.2cm x 21.6cm x 11.4cm)

To order individual baskets:

	Cat. No.	Freezer Volume	Basket	Qty.
	6217	6.8 cu.ft.	Large	Small
	Level	Upper	1
		Middle		1
		Lower	2
	6218	10.3 cu. ft.	Large	Small
	Level	Upper	2
		Middle		2
		Lower	3
	6190	13.7 cu. ft.	Large	Small
	Level	Upper	3
		Middle		4
		Lower	4
	6191	17.1 cu. ft.	Large	Small
	Level	Upper	4
		Middle		5
		Lower	5
	6192	20.5 cu. ft.	Large	Small
	Level	Upper	5
		Middle		6
		Lower	6

FreezerWorks™
Inventory Management Software
FreezerWorks™ lab software is an ideal complement to your frozen material storage program. With FreezerWorks™, you achieve total inventory control and report generation capability for accurate, efficient and cost-effective management of thousands of vials, boxes, racks or bulk packaged materials. Quick access to inventory before you open the freezer reduces frequency and duration of door opening, lessens demand on cooling system,and minimizes personnel exposure to ultra-cold surfaces.

Compatible with Windows® 3.1, Windows® 95,Windows® 98 and Windows® NT
Written in accordance with FDA guidelines for software development, standardization, custom capability and password protection
Tracks inventory location, chronological data, lot number identification, sample nomenclature and many other parameters
Menu-driven screens, formatted displays, customized fields for inventory location
Reference file pick list reduces product exposure to ambient temperature
Report generation, data export, physical control and queries
Catalog No. 6735

FreezerWorks™ Specifications
Software Maximums

Freezers allowed: unlimited
Transactions per vial: 5
Vials per specimen: 20
Specimen records: 10 million
User defined fields: up to 9, excluding dates
User defined dates: up to 4

Minimum Hardware Requirements
IBM PC or compatible, 530k RAM, 2MB hard disk space, MS-DOS 4.0 or higher
Compatible with Windows 98, Windows 95,Windows NT; operates on Windows 3.1 using DOS shell
Compatible with LANtastic® and Novell network system IBM,Lantastic®, Novell and Windows are registered trademarks.