Humidity Pan,
Cat. No. 6322
Extra Shelf,
Cat. No. 6305
Air Pump,
Cat. No. 6323
Data Port & Remote Alarm Contacts,
Cat. No. 6689
Bacteriological Filter,
Cat. No. 6320
Gas Regulator,
Cat. No. 6317
Snap-In Hepa Filter,
Cat. No. 6951
Gas Switching Module, Cat. No. 6281-1
Fyrite Gas Analyzer,
Cat. No. 6310
|
|
 |
CO2
Incubators |
 |
Accessories
Start-Up
and Decontamination Kits, Incubator
Cleaning Agents |
| |
Catalog
No. |
| Start-Up
Kit |
7039 |
| Includes
0.3 micron in-line gas input filter, funnel, gas tubing, water tubing,
"Y" fitting for multiple CO2 sources or multiple
incubator chamber inputs, and water conditioning crystals. |
| |
| Decontamination
Kit |
6990 |
| Includes
replacement snap-on blower wheel, 0.3 micron in-line gas filters
and associated gaskets, funnel, 10' gas tubing, "Y" fitting
for multiple CO2 sources or multiple incubator chamber inputs, and
water conditioning crystals. |
| |
| Water
Conditioning Crystals |
6326 |
| Typically
added to water-jacket when filling; helps prevent trace rust. |
| |
| Roccal
II, 3.5 liter |
6314 |
| Germicide/algaecide
and deodorizer. Can be added to water-jacket to prevent algae growth. |
| |
| Amphyl
Spray, 12 cans/case |
6315 |
| Convenient
spray can for general laboratory applications; helps remove contamination
from hard to reach areas. |
| |
| O-Syl,
3.5 liter |
6316 |
| Destroys
a wide variety of pathogenic organisms. Low surface tension assures
maximum spread and penetration into any cracks or crevices. For
quick, thorough chamber cleaning with minimal downtime. |
| |
| Cabinet
Options and Hardware |
| Humidity
Pan |
6322 |
| Deep
drawn, stainless steel. Size 15.5"L x 9 .5"W x 2.5"D
(39 x 24 x 6.25cm) |
| |
| Extra
Shelf |
6305 |
| Perforated,
polished stainless steel shelves include two channel brackets; shelves
and brackets mount easily without tools. Maximum capacity 24 shelves
per chamber. |
| |
| Air
Pump |
6323 |
| For
Ultima Midi constant flow incubator. Instrument grade pump delivers
constant air supply to air flowmeter. |
| |
| Interior
Outlet |
6304 |
| Vapor-proof
outlet mounted in interior chamber; for use with low heat-output
laboratory apparatus only. Factory installed; specify when ordering. |
| |
| Cooling
Coil |
6555-1 |
| Coil
mounts inside water-jacket to help maintain temperature control
when operating within 5°C of ambient. Connects to exterior bath/circulator.
Factory installed; specify when ordering. |
| |
| Caster
Dolly |
6720 |
| Sized
to fit standard size incubator base. Permits movement of incubator
if required. |
| |
| Left
Hand Door Swing |
6554 |
| Revco
incubators include right hand door swing standard; optional left
hand door swing may be required to meet certain installation restrictions.
Factory installed; specify when ordering. |
| |
| Remote
Monitoring |
| Data
Port |
6689 |
| RS232
output directly from IntrLogic microprocessor. Factory installed;
specify when ordering. |
| |
Humidity
Display
Provides
digital display of internal chamber RH%, and provides humidity compensation
for CO2 sensor. Optional on Elite (welded) models; standard
on Ultima (seamless) models. |
| For
Thermal CO2 Control Systems (3000 Series Models) |
6820 |
| For
Infrared CO2 Control Systems (5000 Series Models) |
6821 |
| |
| Gas
Supply Filters |
| Bacteriological
Filter |
6320 |
| Disposable,
autoclavable; 2" diameter filter delivers only microbiologically
clean gas to the incubator. Improves contamination control and keeps
supply lines and solenoids free or debris. 99.9% effective for 0.3
micron particulates. Easy to install. Package of 3. |
| |
| Oil
Vapor Filter |
6321 |
| In-line
filter removes trace oil from in-house air supply connected to constant
flow incubator. Low cost, easy to replace, non-clogging. |
| |
Gas
Regulators, Two Stage
Two-stage
regulators are required to delivery proper CO2 pressure
to incubator. First stage gauge monitors cylinder pressure. Second
stage monitors low pressure output to incubator. Heavy duty forged
brass with output needle valve and serrated tubing connection for
immediate installation. |
| CO2,
CGA fitting 320 |
6317
|
| |
| HEPA
Filtration |
| HEPA
Filter Option |
6954 |
| Interior
assembly for full-size incubators only; specify Ultima or Elite
Model when ordering. |
| |
| Replacement
HEPA Filter |
6951 |
| Snap-in
HEPA filter, replacement pack, quantity 4 |
| |
Retrofit
Assembly
Provides HEPA filtration for earlier Revco full size incubator
models. |
| For
seamless (Ultima) water-jacketed models |
6950 |
| For
welded (Elite) water-jacketed models |
6950-1 |
| |
| Recorders
and Chart Paper |
| Electronic
Temperature/CO2 Recorder |
6302 |
| Self-contained
case; remote mounted only. Single pen, maintains permanent record
of either temperature or CO2. 6" chart, 7-day chart drive.
Operates on 4-20 milliamp signal from control system. |
| |
| Chart
Paper |
|
| Temperature
scale, for Catalog No. 6302 electronic recorder |
6307 |
| CO2
scale, for Catalog No. 6302 electronic recorder |
6308 |
| |
| Gas
Supply Switching Systems |
|
Automatic
Gas Cylinder Switching Module
Automatically
switches from primary to standby CO2 cylinder. Sounds
alarm when switchover occurs. Available in built-in and stand-alone
configurations. Built-in models are for full-size automatic CO2
incubators only. |
| Factory
installed; specify when ordering incubator. |
6325-1 |
| Free-standing,
115V, customer installed |
6281 |
| Free-standing,
230V, customer installed |
6281-1 |
| |
Fyrite®
Gas Analyzers
Economical, effective confirmation of gas percentage. Includes storage
case and aspirator sampling assembly. |
| Combination
CO2/O2 Kit |
6309 |
| CO2
Kit |
6310 |
| O2
Kit |
6311 |
| CO2
Replacement Fluid |
6312 |
| O2
Replacement |
6313 |
| |
Warranty
Extensions
Second year, parts and labor warranty coverage. For single and dual
chamber models. |
| Single
Chamber |
6624 |
|
Dual Chamber
|
6625
|
| |
|
